Notify me when the price drops
We will email you if we find a lower price on this product!
Compatibility
Please verify this is the correct part number you need before ordering.
Features & Benefits
Notes : These are guaranteed exact fit and don't require the use of a dangerous spring compressor to swap springs,
so they are very easy to install!
The struts/shocks are nitrogen gas charged and tuned for each specific vehicle application.
They will greatly improve the ride, handling,and safety of your vehicle!
Please consult the compatibility table and specifics above for the correct fitment for your Vehicle.
??Package Include: 4X Shocks Struts ??Front Rear Left Right????
We'll ship the struts separately in two pakages if the full set is over weight. Notice please!
HOW TO INSTALL
Step 1: Before you lift the vehicle, loosen lug nuts one full turn.
Step 2: Jack up vehicle and use jack stands for safety & remove the tire from the rotor.
Step 3: (Wheel alignment is necessary after strut replacement.) Marking the position of all the bolts will help
keep the alignment close to original and save time aligning. Use a colored pencil to mark the old strut on the bolt.
Step 4: Use penetrating oil (such as WD40) to coat any rusted fasteners, let soak for approximately 1 hour.
Step 5: (Optional) While waiting for oil to soak, take this time to inspect all other components that may need
replacement (brake pads, rotors, brake hoses, ball joints, CV boots, tie rod ends, bushings, sway bars, etc).
Step 6: Remove any brake line or wire attachments from the strut body. Do not disconnect brake lines (if possible)!
Opening brake lines will require bleeding of the brake system.
Use extreme caution when removing brake lines from your struts, as any damage to your brake line can result in
expensive and time consuming repairs.
Step 7: Remove sway bar attached to the strut assembly or control arm.
Step 8: Remove the tie rod (only if it attached to the body of the strut, if not leave it attached to the steering knuckle).
Step 9: Remove the strut to knuckle bolts at the bottom of the strut. On some vehicles, the brake caliper and rotor
may need to be removed to gain access.
Step 10: Remove the upper mounting plate bolts located in the engine or trunk compartment. Do not remove the
center retaining nut! It is not safe to unload the spring from the assembly in this position.
Step 11: Carefully remove the old strut assembly from the vehicle. Be very cautious not to let the strut "drop" down
on your brake line, rotor or drum.
Any payment methods accepted by ebay will be acceptale.
ShippingPackage will be shipped out within 24 hours (after payment) if there's no problem with the shipping address, or placing wrong order, or we contacted buyer to confirm the compatibilities.
It will takes 2-7 days in transit, according to Different address.
Packages will shipped out by the carriers:
* USPS:United States Postal Service
* FedEx:FedEx Express
* UPS:United Parcel Service
* DHL:DHL Express
* Other:Other carriers.
Returns30-Day Free Return.
Any problem caused by seller, we will provide a 30 days free return.
Contact Us1.To avoid you buying the wrong parts, please check the Fitment chart above before placing an order.
2.You could choose a vehicle from the "My Garage" list. Or Enter your vehicle's details with Year / Make / Model / Trim / Engine. OrContact us for double check.
3. We try to deliver a better online shopping experiencefor our customers. If you have any problem, please feel free to contact us.
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop Category Store Home Air Suspension Air Suspension Valve Solenoid Shocks Struts coilover complete strut Horn Bumper Strut+Suspension Kit+Hub Lift Support dipstick Brake caliper Brake Shoes Brake Pad Tilt Trim Motor Power Brake Booster Mud Flaps Protection Shield & Lift Kit Clock Spring Coil Springs Adjustable Rear Control Arm Strut Mount Air Intake Snorkel OtherHot Item Suspension Lowering Kit Coilovers Shock For 2011-23 Dodge Challenger/Charger RWD USD 259.79 Set of 4 Shocks Struts Absorbers For Honda Civic 2001-2005 Acura EL 2001-2003 USD 95.87 For 2013-2018 Nissan Altima Front Rear Shock Absorbers Struts Assembly Set of 4 USD 89.43 Set of 4 Front Rear Shocks Struts Absorbers For Sierra Silverado 1500 1999-2007 USD 61.81 Set of 4 Front Rear Shocks Struts For Ford Ranger Mazda B2300 B3000 B4000 94-97 USD 54.24 PictureNew List Item For Toyota Land Cruiser Prado 150 GRJ150 09-17 Right 4x4 Off Road Snorkel Kit USD 93.58 For Suzuki Jimny M16A M13A 2018+ Air Intake Relocation Kit 4x4 Off Road Snorkel USD 90.02 For 2003-2008 Honda Pilot 2001-06 Acura MDX Front Pair Shock Strut Mount Kit USD 43.22 For Nissan Patrol Y61 GU TD42 ZD30DDT Left Side Air Intake Ram Induction Snorkel USD 59.95 For Chrysler Pacifica 2017-18 Town & Country 2008-16 Front Strut Mount Bearing USD 28.80 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us Fit 00-05 Hyundai Sonata 01-06 Kia Optima Front Rear Shock Strut SuspensionCompatibility
Please verify this is the correct part number you need before ordering.
Features & Benefits
Notes : These are guaranteed exact fit and don't require the use of a dangerous spring compressor to swap springs,
so they are very easy to install!
The struts/shocks are nitrogen gas charged and tuned for each specific vehicle application.
They will greatly improve the ride, handling,and safety of your vehicle!
Please consult the compatibility table and specifics above for the correct fitment for your Vehicle.
??Package Include: 4X Shocks Struts ??Front Rear Left Right????
We'll ship the struts separately in two pakages if the full set is over weight. Notice please!
HOW TO INSTALL
Step 1: Before you lift the vehicle, loosen lug nuts one full turn.
Step 2: Jack up vehicle and use jack stands for safety & remove the tire from the rotor.
Step 3: (Wheel alignment is necessary after strut replacement.) Marking the position of all the bolts will help
keep the alignment close to original and save time aligning. Use a colored pencil to mark the old strut on the bolt.
Step 4: Use penetrating oil (such as WD40) to coat any rusted fasteners, let soak for approximately 1 hour.
Step 5: (Optional) While waiting for oil to soak, take this time to inspect all other components that may need
replacement (brake pads, rotors, brake hoses, ball joints, CV boots, tie rod ends, bushings, sway bars, etc).
Step 6: Remove any brake line or wire attachments from the strut body. Do not disconnect brake lines (if possible)!
Opening brake lines will require bleeding of the brake system.
Use extreme caution when removing brake lines from your struts, as any damage to your brake line can result in
expensive and time consuming repairs.
Step 7: Remove sway bar attached to the strut assembly or control arm.
Step 8: Remove the tie rod (only if it attached to the body of the strut, if not leave it attached to the steering knuckle).
Step 9: Remove the strut to knuckle bolts at the bottom of the strut. On some vehicles, the brake caliper and rotor
may need to be removed to gain access.
Step 10: Remove the upper mounting plate bolts located in the engine or trunk compartment. Do not remove the
center retaining nut! It is not safe to unload the spring from the assembly in this position.
Step 11: Carefully remove the old strut assembly from the vehicle. Be very cautious not to let the strut "drop" down
on your brake line, rotor or drum.
Any payment methods accepted by ebay will be acceptale.
Package will be shipped out within 24 hours (after payment) if there's no problem with the shipping address, or placing wrong order, or we contacted buyer to confirm the compatibilities.
It will takes 2-7 days in transit, according to Different address.
Packages will shipped out by the carriers:
* USPS:United States Postal Service
* FedEx:FedEx Express
* UPS:United Parcel Service
* DHL:DHL Express
* Other:Other carriers.
30-Day Free Return.
Any problem caused by seller, we will provide a 30 days free return.
1.To avoid you buying the wrong parts, please check the Fitment chart above before placing an order.
2.You could choose a vehicle from the "My Garage" list. Or Enter your vehicle's details with Year / Make / Model / Trim / Engine. OrContact us for double check.
3. We try to deliver a better online shopping experiencefor our customers. If you have any problem, please feel free to contact us.
All rights reserved.